Create a polished industrial-design concept visualization of the AQCTRL wall-mounted fresh-air CO2 ventilation controller, using the two provided technical references as strict geometric layout references. Portrait rounded rectangular warm off-white matte housing, actual dimensions 176 mm wide x224 mm tall x40 mm installed depth, R10 corners. A SMALL flush dark rectangular display lens 48x60mm is near the upper part slightly left of horizontal center. Its small pale gray-green reflective monochrome portrait LCD is 28x48mm inside this lens, with modest black pixel text CO2 850, TEMP23.5, RH45%, AUTO; it is NOT a large OLED or touchscreen. Four separate tiny 7mm round physical pushbuttons in a vertical column to the left of the screen, all same warm white, fine small A,+,-,S markings. Large quiet clean blank lower portion with only tiny subdued AQCTRL text near bottom center. NO Apple logo, NO Apple certification, NO extra front vents or screws, NO added ports. Accurate side depth, subtle 0.3mm horizontal shell seam along edge, very fine vertical side ventilation slots high on right side and lower on left, concealed wall mounting. Inspired by calm premium consumer electronics craftsmanship, finely textured PC/ABS rather than glossy white metal. On a quiet light gray interior wall in a contemporary office, soft daylight, sophisticated understated editorial product lighting, fine shadow, 3/4 frontal angle enough to see narrow right side, full product visible. Beautiful photographic-quality concept rendering, not a fake physical prototype photo; small readable caption at lower left: AQCTRL | DESIGN CONCEPT. Preserve exact proportions and small screen/physical-button layout. Do not depict an exposed PCB.
