test_brownout_cancels_previous_ready_and_restarts_delay (test_control.Control) ... ok
test_fault_chatter_never_accumulates_good_time (test_control.Control) ... ok
test_invalid_ntc_and_reference_block_and_recovery_restarts_delay (test_control.Control) ... ok
test_no_jumper_never_requests_charge (test_control.Control) ... ok
test_nonmonotonic_time_is_rejected (test_control.Control) ... ok
test_startup_waits_full_configured_delay_in_all_32_corners (test_control.Control) ... ok
test_static_threshold_corners_allow_nominal_supply_recovery (test_control.Control) ... ok
test_unmodeled_voltage_does_not_claim_safe_charge (test_control.Control) ... ok
test_voltage_hysteresis_does_not_release_until_upper_trip (test_control.Control) ... ok
./src/common/stdpbase.cpp(59): assert ""traits"" failed in Get(): create wxApp before calling this
test_actual_comparator_pins_and_hc_inputs (test_native_design.NativeDesign) ... ok
test_actual_tps3808_package_pins_clamp_mos_directly (test_native_design.NativeDesign) ... ok
test_complete_native_pcb_vs_schematic_endpoint_identity (test_native_design.NativeDesign) ... ok
test_default_arm_open_no_direct_allow_to_gate_bypass (test_native_design.NativeDesign) ... ok
test_full_drc_including_schematic_parity_is_empty (test_native_design.NativeDesign) ... ok
test_mr_receiver_pulldown_present_for_disconnected_permit_link (test_native_design.NativeDesign) ... ok
test_permanent_ce_pullup_lives_on_charger_not_daughterboard (test_native_design.NativeDesign) ... ok
test_physical_record_never_inherits_model_pass (test_native_design.NativeDesign) ... ok
test_spice_dc_evidence_does_not_claim_vendor_or_transient_proof (test_native_design.NativeDesign) ... ok
test_two_layer_geometry_and_no_main_load_connector (test_native_design.NativeDesign) ... ok

----------------------------------------------------------------------
Ran 19 tests in 0.057s

OK
