PCBA PARTNER
EN
English中文Deutsch日本語Français

MATERIAL FLOW · ENGINEERING TRIAL V0.3

Put the next action at the material location.

A shared electronic-paper label, local workbench and device gateway for electronics stores, general warehouse bins and production lineside replenishment. Connect the displayed task to a recorded material movement.

Software and target builds verified. Physical prototype and site acceptance pending.

Native KiCad carrier render, Rev0.2 HW2, 70 x50 mm. Generic library appearances and maximum capacitor envelopes; external XIAO and display are not included.
Native KiCad carrier render, Rev0.2 HW2, 70 x50 mm. Generic library appearances and maximum capacitor envelopes; external XIAO and display are not included.

01

Three locations. One material workflow.

01

Electronics material warehouse

Match component code, bin and pick quantity to a work-order reference. Reserve stock when a pick is created; deduct it only after business confirmation.

Example: issue 30 resistors from A-01 against a production order. Lot, date-code, MSL and FIFO rules need a separate integration.

Plan an electronics-store pilot

02

Warehouse & hardware bins

Show part code, storage location, available task and unit. Flash the location indicator to help find the bin, then check the part and location in the workbench.

Example: pick 12 fasteners from B-03. Weighing, RFID and automatic quantity sensing are future integration options.

Plan a warehouse pilot

03

Production lineside supply

Use the shortage button to create a replenishment call. Keep the request, delivery task and reference together; add stock when delivery is confirmed.

Example: a station calls for 20 terminals. A call alone does not increase inventory or prove delivery.

Plan a lineside pilot

02

Local software, gateway and label firmware.

The current trial runs on one tracked computer. USB supplies power; USB serial or authenticated BLE carries data. The built-in demonstration mode can be used before the hardware arrives.

Local workbench, gateway and electronic-paper label architecture
V0.3 · local trial architecture
Workbench + SQLite
Create locations, reserve picks, manage replenishment and record confirmations. Integer quantities, transaction checks and request UUIDs prevent a repeated request from becoming a second stock movement.
USB / BLE gateway
Bind each label to its MCU device ID. Parse newline-delimited JSON across arbitrary BLE fragments; commit events to the backend before acknowledging them. A transport response does not complete a task.
Label firmware
Drive the 296 × 128 black-and-white panel, two buttons and locate LED. Keep up to 16 unacknowledged events in a CRC-protected two-slot journal. Reboot requests a fresh display sync.
Business-system extension
Map work orders, locations, units, lots and reconciliation rules before adding ERP/WMS. These connectors, multiuser permissions and a cloud backend are not included in V0.3.

03

Separate receipt, display and stock confirmation.

  1. 01

    Create & reserve

    A pick reserves quantity. Other open picks remain in the queue; only the selected task is shown on a label.

  2. 02

    Send & report

    An immutable command carries its UUID and display version. Firmware reports driver completion after observing BUSY; this is not optical screen verification.

  3. 03

    Confirm the action

    The workbench requires part code, location and operator ID. Wrong codes are rejected. Button 1 confirms the particular task previously reported as displayed.

  4. 04

    Commit & retry safely

    The backend persists each event UUID. A lost ACK can be retried without a second stock deduction. Display receipts alone never alter inventory.

The compatibility API also accepts a legacy empty completion body. Physical-button confirmation does not provide scan records, and the entered operator ID is not an authenticated account. A mandatory-scan or role-based process needs additional policy controls.

04

A module-first prototype you can inspect.

The target is the non-Plus, non-Sense Seeed XIAO nRF52840 with a Waveshare 2.9-inch black-and-white V2 finished module. The carrier is a passive 70 × 50 mm, two-layer interface-board candidate.

Carrier PCBA · native 3D views

Native KiCad carrier render, Rev0.2 HW2, 70 x50 mm. Generic library appearances and maximum capacitor envelopes; external XIAO and display are not included.

Native KiCad carrier PCB layout
KiCad PCB · 70 × 50 mm · engineering candidate
Display / driver
296 × 128; GxEPD2_290_T94_V2; Chinese and Latin text
Power
USB into XIAO; 3.3 V peripheral logic. No battery-life result.
SPI wiring
MOSI D10; SCK D8; CS D3; DC D4; RST D5; BUSY D6
Operator controls
D1 confirm; D0 shortage; D2 locate LED through 1 kΩ
Firmware target
Seeeduino:nrf52:xiaonRF52840; core 1.1.13; S140 7.3.0
Included binaries
EL-001, WH-001 and LS-001: HEX + Nordic DFU ZIP; no UF2

Exact procurement models and dimensions are defined. Complete incoming inspection, first-unit dry fit and supplier DFM before fabrication; optical, power, RF and field acceptance remain unperformed.

SPI / GPIO · wiring drawing
XIAO to panel, buttons and locate LED wiring
3.3 V peripheral logic · verify supplied module revision

26 selected procurement items, with matching drawings.

The USB-powered HW2 pilot defines every standard component and custom accessory: exact model, dimensions, quantity and procurement route. Prepare three working labels plus one complete spare. Physical acceptance and manufacturing release remain pending.

V2 display revision is mandatory; confirm the rear label before ordering. Custom PA12 parts require STEP/STL plus the machining drawing. Module height allowances and the lid fit must be measured on the first sample.

View all 26 selected items
ItemExact modelDimensions / installation envelope (mm)Procurement
MODULE1Seeed Studio 102010448 / XIAO nRF5284021 x 17.8; pin pitch 2.54; row spacing 15.24; allocated assembled height 18Source / quote ↗
MODULE2Waveshare 12956 / 2.9inch e-Paper Module / hardware V289.5 x 38 driver PCB; 66.89 x 29.05 active display; allocated total module thickness 10Source / quote ↗
J1 J2Samtec SSW-107-01-G-S18.29 nominal length x 2.41 width x 8.51 body height; 2.54 pitch; 2.64 tailSource / quote ↗
MODULE1-H1 MODULE1-H2Samtec TSW-107-07-G-S17.78 x 2.54 insulator; post 5.84; total pin length 10.92; 2.54 pitchSource / quote ↗
J3Samtec TSW-108-07-G-S20.32 x 2.54 insulator; post 5.84; total pin length 10.92; 2.54 pitchSource / quote ↗
S1 S2OMRON B3F-1002-G6 x 6 x 4.3; terminal pattern 6.5 x 4.5Source / quote ↗
R1 R2YAGEO MFR-25FBF52-10Kbody L6.3 +/-0.5 x D2.4 +/-0.2; lead D0.55 +/-0.05; formed pitch 10.16Source / quote ↗
R3YAGEO MFR-25FBF52-1Kbody L6.3 +/-0.5 x D2.4 +/-0.2; lead D0.55 +/-0.05; formed pitch 10.16Source / quote ↗
D1Kingbright WP710A10SGCLens D2.9 nominal; base D3.2 nominal; body/stand-off drawing length5.4 +/-0.5; lead pitch2.54; recommended PCB holes D0.9Source / quote ↗
C1TDK FG18X7R1H104KNT064.0 max along leads x 2.5 max thickness x 5.5 max body height; pitch 2.5; lead D0.5 (+0.1/-0.03)Source / quote ↗
C2TDK FA26X7R1E106KRU005.5 max along leads x 3.5 max thickness x 6.0 max body height; pitch 5.0 +/-1.0; lead D0.5 (+0.1/-0.03)Source / quote ↗
PCB1PCBA Partner design MT-CARRIER-R0270 x 50 x 1.6 +/-0.16; two layers; no mounting holesSource / quote ↗
CABLE-EPDWaveshare PH2.0 20cm 8Pin / included in SKU12956200 mm nominal; 8 conductors; PH2.0 module end; individual 2.54 socket endsSource / quote ↗
CABLE-USBStarTech.com USB2AC1MNC1000 mm; jacket OD3.0; connector envelope up to 15.8 x 12.0Source / quote ↗
USB-PANELAdafruit 6069300 mm nominal cable; panel opening selected D14 within vendor D12-D18 range; panel thickness <=13Source / quote ↗
ENC1Hammond 1591UBK120 x 120 x 59 externalSource / quote ↗
ENC2Hammond 1591UC120 x120 x6 nominal overall lid envelope; matching1591U lid; two D8.2 actuator holes and two D2.8 guide screw holes to drawingSource / quote ↗
ENC-SCREWSHammond 1591MS100BK / supplied equivalentM3 x 10Source / quote ↗
MECH1PCBA Partner design MT-CARRIER-STAND-R0278 x 58 x 28.9; board seat at local Z26; pocket 70.8 x 50.8Source / quote ↗
MECH2PCBA Partner design MT-EPD-CRADLE-R0294 x 42.8 x 41.0; board seat at local Z38.2; pocket 89.9 x 38.4Source / quote ↗
MECH3PCBA Partner design MT-PLUNGER-R02square shaft5.4 x5.4; stock length22.0; square flange8.5 x8.5 x1.2; trim bottom tail0-5mm to drawingSource / quote ↗
MECH4PCBA Partner design MT-BUTTON-GUIDE-R0244 x14 x14; square bore6.2 x6.2; button pitch19; two3 x3 screw clearancesSource / quote ↗
FASTENER-KITAdafruit 3299Use M2.5 x 10 screws and matching hex nuts; two pairs per label; kit contains 40 such screws and 80 nutsSource / quote ↗
MOUNT3M TB3550CF / 3M ID710027712425.4 mm wide x 3.05 m mated trial strip; allocate 5.8 mm engaged installation thicknessSource / quote ↗
HUBStarTech.com ST4300MINIOverall length including captive lead 292; width35; height15; captive lead150Source / quote ↗
HOST-ADAPTERStarTech.com USB31CAADP152 mm nominal cable lengthSource / quote ↗
HW2 enclosure machining, component positions and hole coordinates in mm

05

Pairing and recovery are part of the design.

Tracked BLE enrollment

A USB command opens a 60-second pairing window. The SDK supplies a dynamic PIN, printed only over USB. Firmware requires authenticated encrypted mode and a 16-byte key; the gateway also checks label and device identity.

Bounded messages and durable events

20-byte BLE writes feed a bounded NDJSON parser. CRC and two journal slots detect damaged records; storage faults stop normal processing. Reconnection resends pending event UUIDs.

Consistent backup and restore

The management tool checks database integrity and creates a consistent SQLite backup. Restore writes to a new path. Reconcile post-backup movements and restart tags for fresh display versions.

This is an ordinary BLE NUS GATT implementation, not the Bluetooth ESL / PAwR standard. Pairing, bonding, RF coverage, flash endurance and fault behavior still require physical tests.

06

Review what the records establishes.

Completed in the engineering environment

Backend / interface
43 backend checks; 36 browser checks.
Gateway / core
11 USB gateway + 11 BLE gateway host checks; 111 C core assertions.
Storage / target
10,704 journal corruption and truncation cases; three ARM firmware targets compile.
Carrier checks
ERC 0, DRC 0, unconnected 0 and schematic parity 0. Ignored defaults are disclosed in the reports.

Requires physical prototypes

No boards have been flashed or assembled for this trial. Check the screen, GPIO, PIN/bond behavior, three-device radio concurrency, power loss, current, heat, ESD, mounting and a week of real operations. Software and CAD checks do not establish those results.

V0.3 · ENGINEERING TRIAL CANDIDATE

07

Three working tags and one complete spare.

  1. 01

    Prepare the exact modules

    The USB-powered HW2 pilot defines every standard component and custom accessory: exact model, dimensions, quantity and procurement route. Prepare three working labels plus one complete spare. Physical acceptance and manufacturing release remain pending.

  2. 02

    Prove a single desk prototype

    Check supply, USB identity, full-text display, buttons, locate indicator, duplicates and restart behavior before BLE commissioning.

  3. 03

    Run the three-scene pilot

    Bind one label per workflow, execute the acceptance sheet and reconcile actual stock. Collect coverage, refresh latency and failure data before setting deployment limits.

08

Engineering files, free to download.

The updated complete package includes V0.3 software and firmware, Rev0.2 KiCad/CAM, the selected BOM, native 3D, four PA12 parts and housing drawings. HW2 changes hardware procurement; software and firmware bytes remain unchanged. One complete package contains the current set.

Five page languages. The HW2 assembly PDF is Chinese. Current English software documentation is included in the complete package. Preserve upstream licenses.

Discuss a material-tag pilot

09

Decide the next development step.

Can this replace a retail electronic shelf label system?

The present design focuses on material movements and local task confirmation. Retail price engines, enterprise fleets, ESL/PAwR, multi-store operation and battery optimization require a separate product architecture.

Can it connect to our ERP or WMS?

The local API and protocol are documented. An integration needs field mapping, who owns inventory, an order-ID strategy, retry and reconciliation rules, and acceptance tests using your system.

Can we order finished tags from this download?

The download is an engineering trial candidate. Share requirements to define a prototype or custom PCBA project. BOM locking, samples, DFM/DFA, RF/EMC, enclosure and product-specific release criteria precede a production order.

Turn your material workflow into a pilot brief.

Share the application, number of locations and simultaneous tasks, power source, shelf/mounting photos, target viewing distance, update frequency, ERP/WMS interface, language and target date. We can scope electronics, firmware, gateway software, enclosure integration and prototype verification.

  • Application and process owner
  • Pilot quantity and future fleet size
  • Power, network and mounting
  • Existing item / location / work-order codes
  • Required scan and account controls
  • Acceptance targets and schedule